===============================================================================
License Agreement
===============================================================================

The license agreement for this software (hereinafter referred to as the
SOFTWARE) is described as follows.

1. Intellectual property rights in the SOFTWARE shall remain in Fuji Xerox Co.,
   Ltd. (hereinafter referred to as Fuji Xerox) as well as the original
   copyright holders.

2. The SOFTWARE can only be used with compatible Fuji Xerox products
   (hereinafter referred to as the COMPATIBLE PRODUCTS) within the country of
   purchase of the COMPATIBLE PRODUCTS.

3. You are required to abide by the notes and restrictions (hereinafter referred
   to as the NOTES AND RESTRICTIONS) declared by Fuji Xerox while using the
   SOFTWARE.

4. You are not permitted to alter, modify, reverse engineer, decompile or
   disassemble the whole or any part of the SOFTWARE for the purpose of
   analyzing the SOFTWARE.

5. You are not permitted to distribute the SOFTWARE on a communication network,
   or transfer, sell, rent or license the SOFTWARE to any third party by
   duplicating the SOFTWARE on any media such as floppy disk or magnetic tape.

6. Fuji Xerox, Fuji Xerox Channel Partners, Authorized Dealers and the original
   copyright holders of the SOFTWARE shall not be liable for any loss or damage
   arising from matching of hardware or program that are not specified in the
   NOTES AND RESTRICTIONS of the SOFTWARE, or any modification to the SOFTWARE.

7. Fuji Xerox, Fuji Xerox Channel Partners, Authorized Dealers and the original
   copyright holders of the SOFTWARE shall not be responsible for any warranty
   or liability with respect to the SOFTWARE.

===============================================================================
PCL 6 Print Driver Ver.6.7.1 Additional Information
===============================================================================

This document provides information about the driver on the
following items:

1. Target Hardware Products
2. Requirements
3. General Comments
4. Limitations
5. Software Update

---------------------------------------------------
1. Target Hardware Products
---------------------------------------------------
FUJI XEROX DocuCentre SC2022

---------------------------------------------------
2. Requirements
---------------------------------------------------
Please note that this driver operates on a computer running on the following
operating system.

  Microsoft(R) Windows Server(R) 2008
  Microsoft(R) Windows(R) 7
  Microsoft(R) Windows(R) 8.1
  Microsoft(R) Windows(R) 10

  Please visit our web site to check the latest software and supported
  operating systems.

---------------------------------------------------
3. General Comments
---------------------------------------------------
* Close all the running applications before installing the print driver.

* Always reboot the computer after installing an upgraded version of the print
  driver.

* If you have deleted an older version of the print driver, always reboot the
  computer before installing the new version.

* Some applications provide printing options pertaining to the number of copies
  and collated copies. Always select the printing options in the application
  unless the instructions specify otherwise. Use the print driver dialogs to
  select advanced options such as 2 Sided Print, Sample Set or options that
  are not available in the application.

* Always close the print driver dialogs and/or the application Print dialog box
  before you make any changes to the default settings of the print driver via
  the Control Panel.

* For the installation through the networks, if you right-click
  on [Printer] folder, go to [Run as administrator] from the menu and select
  [Add printer...], printer icon may not be generated.

* Rename a Printer Icon should comply OS file naming convention. Use Symbols or
  special characters may incur renaming error or unexpected print driver
  behavior.

* Before installing a print driver in the Windows cluster environment, you need
  to install it on each node in the cluster.

---------------------------------------------------
4. Limitations
---------------------------------------------------
* When a printed pattern or diagram is different from what you see on the
  screen, changing the following settings may alleviate the problem.
  - Change the [Image Quality] setting on the [Color Options] tab.
  - Change the [Image Types] and the [Image Auto Correction] settings on the
    [Color Options] tab.
  - Set [High Speed Image Processing] on the [Advanced] tab to [Off].
  - Set [Draw the pattern with fine lines as per the resolution] on the
    [Advanced] tab to [On].
  - Change the [Resolution] setting in the [Image Options] group on the
    [Advanced] tab.
  - Change the [Halftone Print] setting in the [Image Options] group on the
    [Advanced] tab.

* The print layout may be changed when you change the [Image Quality] in the
  [Color Options] tab.

* Depending on the application, if the resolution of the driver is high, the
  size of the print data may become huge and printing cannot be done properly.
  When this happens, specify the following settings:
  - Specify the [Resolution] in the [Image Options] group in the [Advanced] tab
    to [300dpi] or [200dpi].

* When doing a print job by specifying Paper Source as Auto, be sure to set
  Paper Size in the application to the Paper Size that the driver supports to
  enable the automatic paper feed feature.

* When using the Form Overlay feature, use form data of the same Paper Size,
  Resolution, and Image Settings as those of the document you want to print.
  If these settings are different between form data and the page where the form
  data is incorporated, expected print results may not be obtained.

* On Windows 8.1 or later versions, Annotation and Watermark may not be printed
  even if [Annotation] and [Watermark] are specified.
  To make them function, set [EMF Spooling] to [Enabled] on the [Advanced] tab.

* When printing from the application running in the new UI environment suitable
  for touch controls, which was introduced on Windows 8.1 or later versions, if
  [Black and White] is displayed as Output Color on the printing setting screen,
  which is displayed after a printer is selected from the device charm, the
  output will be in black and white even if the setting is changed to [Color].
  To output in color, open [Devices and Printers] on Windows desktop,
  right-click on the printer you use to select [Printing Preferences], and in
  the [Default Setting] dialog, change [Output Color] on the [Paper / Output]
  tab back to [Color].

---------------------------------------------------
5. Software Update
---------------------------------------------------
    The latest software is available on our web site.

        http://www.fxap.com.sg/

    Communication charges will be borne by the customer.

-------------------------------------------------------------------------------
Microsoft, Windows and Windows Server are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.

Other company names and product names are trademarks or registered
trademarks of the respective companies.

libjpeg 6b
----------
This software is based in part on the work of the Independent JPEG Group.

(C) Fuji Xerox Co., Ltd. 2018
