﻿Build 520
	2018 Release
	Cycloidal lobe mechanism added
	Elliptical gear sets added

Build 440
	Improvements made to the bevel Free_Form and Non_Standard manufacturing methods
	ANSI B92.2M-1980(R1989) can now be in inch units
	Compiled Help has been added to the Help system.
	Corrections to the SolidWorks assemblied when compound gears are being created.
	Correction when the an internal spline is used as a bore and the units are different than the parent component

Build 439
	Correction to the spur gear sizing program concerning the material hardness.
	Keyways can now be updated
	CAD assembly mating for joined gears has been enhanced
	Correction to the test radius when in the metric mode
	Changes to the way over the pin measurements are dealt with for free-form mode, mainly internal gears but also the minimum thickness

Build 438
	An assembly of two gears can be created from the Gear Sizing module.
	Worm measurement over 3 pins is available.
	Correction when creating an internal spline as a bore to a helical gear
	

Build 434, 2013-05-26
	Free Form method added to bevel gears
	Correction to the Spiral_Tooth_Generating_Diameter input
	Correction to the path where the Company Standards are stored


Build 432,  on or before 2013-03-26
	Schematics for spur, bevel and worm gears.  Press the F4 key to display.
	Updates the file location if the HD letter has changed.
	Improvements to bevel tooth mesh when creating a SolidWorks assembly.
	Correction to spline position on screen if the parent is not on 0,0
	DIN_5482 standard added for splines
	Added assembly annotations for spur, splines and planets
	Added a screen capture button to registration form
	Changed how Screen gets focus
	Improved checking for duplicate names when adding a new spur gear
	Many enhancements to the annotations


Build 428,  on or before 2013-02-05
	Revised agma rounding  FROM PAGE 27  ANSI/AGMA 2000-A88
	Improvements to worm wheel teeth when created in metric units
	Changes to bevel spline creation in AI
	Changed the order of items in the property lists
	Changed the way the dedendum/angle is calculated for gleason bevels, how/when the 0.002 inch is considered
	Changed the main GearTeq form startup position
	Revised the way the text colors are shown on screen
	Test radius added for spur gears
	Crowning added to helical gears, profile modification repairs for helicals
	Corrections to Profile modifications for helical gears and spurs.
	XYZ surface text files were added
	DIN Splines, bad reference dia for 2.0 mod, 14 teeth splines
	